---

• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

場所やワークを選ばない。つまり可動性と柔軟性を備えたレーザーシステムです。

当機種ToolRoomは、多くのお客様からのご要望にお応えするために開発されたレーザーシステムです。

作業現場では、素早く作業が開始できるよう、配線の準備や、使⽤する道具や材料を予め⼿元に揃えておく必要があります。

シールドガスや排気装置についても、しっかりと装備されていなければいけません。

これでは「モビリティ＝可動性に優れている」という条件について疑問が⽣じますし、これまで使⽤していた運搬⽤キャスターも重さの限界を⼤きく超えることになります。

ジャッキング機能を備えた新型キャスターに加えて、フォークリフトやパレット、クレーンを⽤いて、容易に運搬することが可能です。

レーザーは150W, 300W, 450Wの3タイプをご⽤意しています。

• 
  ×Close

  Teach in

  

  Enables the handling of complicated geometries in four axis without complex programming. A small number of support points are hit once on the contour of the work piece in advance. The user can subsequently move the programmed welding line forward and backwards using the joystick and can also shift its position by offsetting the start point.

  Close
• 
  ×Close

  Schutzgas

  

  Programmable shielding gas post-flooding

  In order to eliminate the oxidation of the welded joint directly after it has been welded, the times during which the shielding gas ist still conducted on the welded joint following the welding can be individually set.

  Close
• 
  ×Close

  PWM

  

  In the lower power range, which depends upon high stability, traditional lasers are inclinined toward a low „pulse to pulse stability“ and thus to a non-uniform welding result. The Pulse Width Modulation (PWM) gives a vastly more fine and stable coordination, as the internal energy supply here works in the area of the optimal output.

  Close
• 
  ×Close

  Pulse shaping

  

  Free pulse shaping enables the setting and saving of all possible variations in the pulse process. Materials with different thermal coefficients of expansion thus show a clearly better welding behaviour - your laser´s area of application thus expands.

  Close
• 
  ×Close

  pulse distance synchronization

  

  Provides a constant pulse overlapping through the dynamic synchronization of the pulse trigger with the axis movement. PDS ensures replicable welding results with different speeds and consistent, homogenous weld joints in all movement situations. Therefore, a higher operating speed can be reached.

  Close
• 
  ×Close

  on axis light

  

  This allows you to see into deep crevices or holes which would be in darkness if lateral illumination were used. The illumination comes alongside the optical beam and always illuminates accurately from above.

  Close
• 
  ×Close

  On axis gas

  On-axis shielding gas supply

  

  A reliable on-axis shielding gas supply enables perfect welding even with highly-sensitive materials, such as titanium, for example.

  The welded joint is always flooded with shielding gas under 90 degrees. This prevents the sort of shadow effects and swirling which occurs when a lateral gas supply is used.

  Close
• 
  ×Close

  FSS 300

  Close
• 
  ×Close

  FSS 150

  Close
• 
  ×Close

  Rotation Axis

  

  Specially developed turning units increase the user value of your workstation. They incorporate all functions of CAN-Step control, available at the touch of a button, including pulse synchronization and „Teach in“ programming.

  Additional features: • Swivel-mounted • Free implementation up to Ø40 mm • different chuck types, chucking range up to Ø 160 mm.

  Close
• 
  ×Close

  Display

  Large display with backlighting

  

  The large backlit display provides the user with a direct view of all the important operating parameters. Adjustment limits are visualized.

  The adjustment of the parameters themselves takes place via the work chamber´s control elements.

  Close

Specification

• 150W
  FSS
• 300W
  FSS
• 450W
  FSS